RSS Auto Tool News Feeds

Pinion Nut Cone 69.50
Like Volkswagen Tool 381/14Pinion Nut Cone Socket Cone shaped Socket with 1/2" drive.This tool is used for R&R of grooved nutwhich retains pinion bearing within its housing.Applicable: Early VW air cooled models.
read more:

Special Crowsfoot Socket 22.50
OXYGEN SENSOR Socket 4491b This is a Special 22mm Crowsfoot Socket with 3/8 Drive Used for the removal and replacement of Oxygen Sensor that are situated within a confined area.No need to snip the wires leading to the unit when all you want to do is check the sensor.Applicable: Most European Models.
read more:

13/16 Spark Plug Flex Socket 6.50
Flexible 13/16 (20.8mm) Spark Plug Socket
3/8 Drive Flexible joint 6 Point Socket
with Neoprene insert.
Excellent for the professional or shadetree mechanic!

read more:

30mm Thin Wall Deep Socket 47.00
Specially designed 30mm thin walled 12 point, deep socketUsed for the proper R&R of ToyotaTransmission drive shaft flange nut and pinion drive shaft flange nut of differential

read more:

5/8 Spark Plug Flex Socket 6.50
Flexible 5/8 (16mm) Spark Plug Socket
3/8 Drive Flexible joint 6 Point Socket
with Neoprene insert.
Excellent for the professional or shadetree mechanic!

read more:

8 Piece XZN Set 29.50
Here is a set you may nothave seen before,especially this quality and for this price!
STUBBY XZN TRIPLE SQUARE8 PIECE SOCKET SET
Socket Set 3/8 DriveSizes included:
4mm, 5, 6, 8, 10, 12, 14 and 16mm
Comes with the plastic carrying case.
Sturdy compact One Piece design...SWEET.
Satin Chrome with black impact tips.
Super "New" S2 Alloy Steel. Fully Heat Treated
The large 16mm socket alone is hard to find for less than 12 dollars.

read more:

92mm Oil Wrench Socket 38.00
92mm Oil Filter Wrench
Will fit all Mann Knecht filters that require (92mm) and 15 inside flats.
Original Factory Tool Made in Germany. Size 92mm.
With outer (top) square drive size 12.5mm = 1/2 inch for ratchet or socket, or use the outside hex 27mm with a wrench.
15 point (inside flats or flutes).
Excellent high quality tool.
This tool will fit many (92mm) Volkswagen Audi Diesels.

read more:

Brake Caliper Rewind Set 49.50
U.S./EURO/ASIAN/4WD VEHICLES
Disc Brake Pad & Caliper Service Tool Kit
Includes 8 adapters Magnetic socket adapter.
For brake assemblies
For rotating pistons back into caliper to provide clearance for new pads
Prevents damage to the piston and bootDesigned for use with Mercedes, BMW, Volkswagen, GM, Audi, Ford,Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Land Rover and 4 wheel drive vehicles.Blow molded carryingcase for easy storage.

read more:

Brake Spring Plier 11.99
Brake Spring Tool for removing and installing Shoe return springs on most drum brakes. The socket end removes the spring from the anchor stud, and the notched end installs the spring on the anchor.

read more:

Extra Long 5/8 Spark Plug Socket 7.00
Extra Long 5/8 (16mm) Spark Plug Socket
Overall Length is 4 1/2 inches.
3/8 Drive size. Knurled drive end plus rubber insert for better grip.
Excellent for the professional or shadetree mechanic!

read more:

Female Torx Set 14.99
10 Piece Torx Female Socket Set
3/8 Drive and 1/4 Drive assortment on a rail.
1/4 Drive Sizes are: E4, E5, E6, E7, E8.3/8 Drive Sizes are: E10, E12, E14, E16, E18.
Excellent for the professional or shadetree mechanic!

read more:

Heavy Duty 17mm Socket 22.99
Heavy Duty Allen 17mm Stubby Socket 1017 Heavy duty Allen socket designed specially for R&R of gearbox drain plugs.Also for a variety of other applications.1/2 Drive Applicable: Most European Vehicles

read more:

Heavy Duty 8mm Allen 27.95
Multiple applications for this handy tool.
Super Duty 8mm Allen Item P243 Extra Long 3/8 Drive SocketThis 8mm Extra Long Allen Socket is a solid one piece construction.Overall length is 7.75 inches.Used for R & R of some Benz Cylinder Headbolts,and some BMW C.V Joint Bolts,and Porsche Heat Exchange Exhaust sysetms 911 930 Porsche

read more:

Honda Pulley Holding Tool 59.50
This tool is used for removal and installation of the crank bolt on most Honda and Acura engines. In operation with the use of a 1/2" breaker bar or ratchet this tool holds the harmonic damper pulley from rotating when removing the pulley bolt. There is a hole in the center of the tool to allow the use of a socket and extension to break loose or tighten the pulley bolt.Applications Accord 2.2L 4 cylinder 90 97; 2.7L 6 cylinder 96 97; 2.3L 4 cylinder 98 & later; 3.0L V 6 98 & later. Civic 1.6L 4 cylinder 92 & later. CRV 2.0L 4 cylinder 97 & later. Del Sol 1.6L 4 cylinder 93 97. Insight 1.0L 3 cylinder all. Odyssey 2.2L 4 cylinder 95 97; 2.3L 4 cylinder 98; 3.5L V 6 99 & later. Prelude 2.2L 4 cylinder 92 & later; 2.3L 4 cylinder 92 96 S2000 2.0L 4 cylinder all. ACURA CL 2.2L 4 cylinder 97; 3.0L V 6 97 & later; 2.3L 4 cylinder 98 & later. Integra 1.6L 4 cylinder 90 92 1.7L 4 cylinder 93 & later 1.8L 4 cylinder 94 & later. Legend 3.2L V 6 91 95. NSX 3.0L V 6 91 & later 3.2L V 6 98 & later. RL 3.5L V 6 96 & later. TL 3.2L V 6 95 & later.

read more:

Honda Toyota Nissan Tool 45.95
12mm Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 12mm jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.

read more:

Honda Valve Adjustment 45.95
10mm Jam Nut Valve Adjustment Tool
Designed for a wide variety of cars with 10mm jam nut valve adjustment screws.
This two in one tool has a window in its socket so the technician can see the position of the screwdriver blade holding the
adjustment screw as the jam nut is tightened.
This visual contact in addition to the feel of holding the screwdriver The unique handle pivots from one side to the other, so the window is always visible.

read more:

M9 Toyota Headbolt Tool 14.99
Size M9 XZN (Triple Square) 12 Point Socket. This item is called XZN (XZN means the tool has 12 points) and is very hard to find in this size.The is bigger than 8mm and smaller than 10mm. The 8 and 10 are relatively easy to find. This size is not. This tool is 100mm long, allowing for easy access to hard to reach headbolts.

read more:

Nissan Sensor Socket 33.95
Coolant Sensor Socket for Nissan.
This labor saving tool has been designed to easily remove and install
the coolant temperature sensor on most Nissan fuel injected V6 3000 engines.
Its configuraton allows it to fit down into the confined area of the sensor,
eliminatong the need to remove many brackets and components around the front of the engine and car.

read more:

Oil Filter Wrench 14.99
Oil Filter Socket
For removing the plastic housing on cartridge type oil filters.
86mm 16 Flute 3/8 Drive size.

read more:

Pin Wrench Socket 27.50
Used for R&R of rear axle bearing nut.Applicable: All Subaru 4WD models. Please note: Excluding Justy

read more:

Socket Holder Set 3 9.99
3 Piece Socket Holder SetUsed for holding sockets sizes: 1/4", 3/8 and 1/2"

read more:

Special Open Socket 22mm 25.00
On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action: 

read more:

Special Socket 00
This special socket is for most 1986 and later fuel injected Honda and Acuras.
It has been designed to easily remove and install the specialty shaped banjo bolt
used to attach the fuel line to the fuel filter. In operation, this socket fits completely over the head
of this odd shaped banjo bolt for 360 of contact.
This allows a firm grip on this "often very tight" banjo bolt and eliminates the possibility
of stripping the minimal flats provided on this O.E. fitting when using a 17mm open end wrench.

read more:

Split Socket 9.99
Deep Split Socket size 7/8
Removes and Installs Oxygen Sensors onMany Domestic and some Imports. Special Socket with slotted cutout for clearance of wire harness.Provides proper depth to fit over the sensor.Use with 1/2 square drive or wrench end.
Provides adequate depth to fit over sensor. Heat treated alloy steel.

read more:

Toyota Bonus Set 37.99

ZDMAK SPECIAL DEAL
Headbolt tool and Valve tools...
First Item: Valve tool designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe. In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness. Works especially well with 3S FE and 3S GELC Toyota DOHC.Toyota number 09248 55040For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.Packaged as shown with pliers and spacer wedge. Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 199

PLUS * Toyota Headbolt Tool
12 Point (Triple Square) Socket.
This item is called XZN (style) and is very hard to find. 1/2 Drive Socket is 100mm long, for easy access to hard to reach headbolts.

read more:

Triple Square XZN Bit Set 9.99
12 Point (XZN) Bit Set
Set of 4
Metric (TRIPLE SQUARE) 12 Point Socket Bits.
Sizes: 6, 8, 10 and 12mm
Picture is for reference only. Each bit is 3 inches Long.
Heat treated alloy steel, sturdy 1/2 inch hex drive shaft.
Excellent for the German car Mechanic.
The German tool books use the term "XZN" to describe the 12 point style).

read more:

Two Sets * Special 49.50
Triple Square and Hex Stubbies!
Here is a sweet combo set for a good price.
STUBBY XZN TRIPLE SQUARE 8 PIECE SOCKET SET
PLUS 9 PIECE HEX STUBBY SET

The Triple Square set description as follows:
Socket Set 3/8 Drive
Sizes included: M4, M5, M 6, M8, M10, M12, M14 and M16
Sturdy compact One Piece design.
Satin Chrome with black impact tips.
Super "New" S2 Alloy Steel. Fully Heat Treated

PLUS Metric Hex Stubbies 1/4 Drive 9 Piece Set Check it out.
Short Pattern Hex Metric Sockets in small popular sizes.
Available Now at a fair price.
These are the Sturdy One Piece Design.
Hex Sockets great for working on German Cars.
Sizes included: 2mm, 2.5mm, 3, 4, 5, 6, 7, 8, 10mm.
S2 Alloy steel THE STRONGEST DRIVERS AVAILABLE.
Drivers heat treated to 56 to 62 RC. Satin Chrome plating.
Both sets come in plastic carrying cases.

read more:

10mm Triple Square Headbolt Tool 24.99
Headbolt ToolTriple Square XZN Socket M10
12 Point Socket 1/2 Drive Super High Quality Tool!

read more:

12mm Triple Square Headbolt Tool 24.99
Headbolt ToolTriple Square XZN Socket M12
12 Point Socket 1/2 Drive Super High Quality Tool!

read more:

19mm Suspension Strut Socket 59.95
Special 19mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 19mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both.

read more:

2 Piece Socket Set 32.99
22mm Special Tube Socket 4491A Plus Pin Wrench VW524
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

read more:

21mm Suspension Strut Socket 59.95
Special 21mm Tube SocketUsed for securing the Strut tower retaining nut of select European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)For removing and installing front strut unit on VW Audi 21mm nut.This tool is often used in conjunction with a pin wrench / allen wrench or both.

read more:

22mm Socket plus 7mm Allen Wrench 26.99
2 Piece set
22mm Special Tube Socket 4491A plus 7mm Allen WrenchUsed for securing the Strut tower retaining nut of most European models(crucial when adjusting tension of front shocks). The 2/3 open side walls ofthis socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) (This socket can also be used for R&R of Oxygen Sensor.)
Plus a 7mm Allen Wrench.The Allen wrench is 7mm and is 7.5 inches Long.

read more:

22mm Strut O/2 Sensor Socket 18.99
On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action:

read more:

3 Piece Oil Service Set 29.50
3 Piece Oil Service Set includes sizes 36mm, 32mm and 27mm 6 point sockets. (36 mm for M52, M60, M62, M70, M73 engines) Special 36mm Oil Filter Wrench Removes and installs filters on BMW Mini Cooper. The low profile socket fits 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8 in. drive Not for use with an impact wrench. BMW Mini Cooper, BMW M52 6 cylinder, BMW M60 8 cylinder, BMW M70 12 cylinder.Mercedes Benz diesel engines: OM604, OM605, OM606 (1995 W124 E300 diesel, 96 97 W210 E300 diesel, 1998 E300 turbodiesel).Same as Mercedes tool number: 606 589 01 09 00VW Volkswagen VR6 Also for Ford Truck 6.0L 03 04
Plus you get the 32mm and the 27mm.
27 mm for R&R of oil filter cartridge element.App.: M163 (Class A), C230 (Compressor)
32 mm for R&R of Oil filter cartridge element.Applicable: Opel Astra, Corsa, VW Passat, Audi.

read more:

3 Piece Strut Set 34.99
On Sale! 22mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long.

read more:

41mm Socket 3/4 Drive 54.99
Hazet 41mm Socket 6 Point 3/4 Drive size with locking Pin.
World Class Hazet Tools Made in Germany!

read more:

5mm Ball Tip Hex Socket 21.50
5mm Ball Tip Hex Socket 3/8 Drive. Overall Length is 116mm.
Super High Quality Tools Made in Germany!

read more:

Adjustable Spark Plug Socket 57.50
Adjustable Spark Plug Socket (13/16) 20.8mm.
Adjusts from 137.5mm up to 197.5 overall.

read more:

Alternator Socket 27.00
For mounting the V belt pulley (slip clutch pulley) at the alternator (manuals call it a generator),
especially for T.D.I. VW Golf III, Vento, Passat and AUDI A 3
17MM outside dia. Length 30mm.
Also for Boxster. (See repair Group 27 (Porsche Bulletins) Boxster Alternators with free wheeling Pulleys. High Quality Tool
Made in Germany.
This 3400 is Hazet number 2592.

read more:

BALL HEX SOCKET 27.50
LONG HEX EXTENSION USED TO REMOVE/INST ALL AND TORQUEING KNOCK SENSORS. V6 ENGINE

read more:

Big Daddy Master Hex Set 89.50
This is a big Master Hex Socket SetMetric and SAE
Get yours now. Comes with all the popular METRIC sizes for working on Europeanvehicles plus all the SAE bonus sockets!
Metric sizes are: 19, 17, 14, 12, 10, 9, 8, 7, 6, 5, 4,3, 2.5.
SAE 3/4, 5/8, 9/16, 1/2, 7/16, 3/8, 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8 inch.
Metric Hex Drivers 2mm thru 19mm SAE, Fractional Drivers 3/32' thru 3/4' All bits are S2 steel, the best bits available Chrome Bit holders, withdiamond knurl for fingertip control Drivers have 1/4', 3/8' or 1/2'square drives Plastic storage case Press fit bits & holders.
Lifetime Warranty

read more:

Caliper Tool 19.99
SPANNER SOCKET RR CALIPER USED TO TURN THE REAR BRAKE CALIPER PISTONS WHEN REPLACING BRAKE PADS

read more:

Duckwear Tool Roll 19.99
Bucket Boss Brand Duckwear Tool Roll Rolls up to store easily in small places Divided pockets organize and protect wrench sets, screwdrivers, tire gauges and more. Socket strip holds 3/8 inch or 1/4 inch sockets. Product Description From the Manufacturer:A clever self contained design with 23 pockets for wrenches, ratches and automotive hand tools. Equipped with socket clips that hold 3/8 inch and 1/4 inch sockets. Entire unit rolls up and secures with two barrel locks and a carry handle for transport. For the house, truck, boat and shop. Heavy duty and much better than a small bulky tool box. The open end of the tool slots face to the inside so wrenches and screwdrivers dont fall out when it is rolled up. The draw strings on each end are a heavy elastic with a quick tie so the whole thing stays together.

read more:

E5 Female Torx 5.99
Size E5 Torx Female Socket 3/8 Drive Very hard to find"single" female Torx.
We have a wide variety of single sockets.
Excellent for the professional or shadetree mechanic...
Lookin the SOCKET SECTION for more sizes...CLICK HERE

read more:

Extra Long Spark Plug Socket 19.99
Extra Long Spark Plug Socket
It is easy to change 16mm (5/8") spark plugs with this long pattern socket.
This socket comes in a 3/8" Drive plus a hole for optional use of tommy bar. The overall length is 10 inches. High Quality tool Made in Germany.

read more:

Headbolt & Drain Plug Socket Set 2 28.00
Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

read more:

Headbolt Socket 17.50
This is the tool you are looking for.
Plus it is on sale!
Number T10070 Headbolt Tool 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tool for this application. T10070 is the correct current VW Audi number for this socketThe old tool number was 3452 and is now discontinued..Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this a Polydrive.This is NOT a Torx socket although it is a 6 point tool.The points are more flat (squared off) than a torx.and it is NOT a XZN (tri square) Socket.

read more:

Headbolt Tool Set 2 29.50
These are the tools you are looking for!
Plus they are on sale!
Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

read more:


You Searched for

XZN Socket

Click XZN Socket to go to Socket World
SEARCH RSS NEWS USING THE WORDS BELOW

XZN Socket | Torx Socket | 5 point Socket | triple square socket | Hex Socket Sets | Allen Socket | Allen Socket Set | tamperproof socket | Security bit Socket | Security Socket | Torx bit | torx screwdriver | Socket World | Automotive Sockets | Special Sockets | BMW Socket | Audi Socket | VW Socket | Mercedes Socket | Porsche Socket | BMW Socket Set | Audi Socket Set | Volkswagen Socket | XZN Socket |


Mortgage Grab home refinancing home mortgage refinancing 2nd mortgage mortgage quotes mobile home refinance best rate home refinancing debt consolidation home loan



Web Design Hosting and internet marketing by MMK Technologies

(c) Copyright 2005 Socket World.

 

  Trade Links With ZDMAK